Avidsen 112110 Manual De Instrucciones página 21

Audio HANdset
Between the handset and the doorplate (100m maximum)
To ensure good audio and video quality, it is advised to not use more than 100m of cable between the
intercom and the doorplate. Connect the wires as follows (incorrect wiring can damage the doorplate).
The cable's length determines which cable section is to be used:
Cable length
0 to 25m
0 to 50 m
50 m to 100 m
Between the handset and the electric strike plate (not included)
Use a 12V electric strike plate with or without mechanical memory and a suitable 12V transformer (not
provided).
For the connection between the handset and the strike plate, use a cable of this kind:
Cable length
0 to 50 m
Between the handset and the automated gate (not included)
For the connection between the handset and entering a command on the automated gate, use a cable of
this kind:
Cable length
0 to 50 m
Automated gate dry contact
mains adapter
(included)
*electricity supply to the 12V electric strike plate should be adapted to the 12V strike plate
model (500mA for a 12V 500mA strike plate, 2A for 12V 2A strike plate, etc.)
OR
input
2 1
C - iNSTALLATiON
Section to use
0.6 mm telephone cable
0.75 mm2
1.5 mm2
Section to use
0.75 mm2
Section to use
0.75 mm2
Electric strike plate 12V
Supply to the 12V* strike plate
2
1
9
en