Publicidad
Attaching the blades to the fan motor
Remove the decorative bottom plate by turning anti-clockwise.
Before installing the blades (C), remove the motor screws (EE)
from the motor (B).
Insert the blades (C) through the side slot of the motor (B) and
align with the three blade screw holes. If the holes do not align,
the blade (C) is upside down. Reverse the blade (C). The blade (C)
should fit snugly and the screws (EE) should slot in vertical/
perpendicular with the blade screw holes.
Secure the blades with three motor screws (EE), and ensure that
the three blade screws (EE) are tightened at the same time. Do not
B
over tighten the screws (EE) as this can damage the blades (C).
Repeat this process for all blades (C).
Replace the decorative bottom plate by turning clockwise.
EE
B
EE
C
1-855-HD-HAMPTON
Publicidad
