Descargar Imprimir esta página

Frico Thermozone WAC 300 Serie Manual De Instrucciones página 22

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
GB
TVV20/25, valve + SD20, valve motor
Water regulation with heat supply controlled
by thermostat, but without the option of
adjusting or stopping the water flow.
Pipe dimension for SWR20 is DN20 (
for SWR25, DN25 (1").
Assembly- and mounting instruction, see
page 10.
Room thermostat
See list of accesories on page 34.
Security
• Ensure that the area around the intake and
exhaust grille is kept free from material
which could prevent the air to flow through
the unit!
• During operation the surfaces of the unit
are hot!
Maintenance
NOTE! Disconnect electricity prior to cleaning
or inspection (units with electric heat can be
supplied from more than one connection).
The fan motors and the other components
require no maintenance other than cleaning
when necessary, however at least once year.
Grille, impeller and elements are vacuum
cleaned or dried clean with a damp cloth.
Open the inspection hatch to reach elements
and impellers.
The garantee is only valid if the
Thermozone units are used in the manner
intended by the manufacturer and in
accordance with the installation and
maintenance instructions.
Manufacturer
Our products are manufatured in accordance
with applicable international standards and
regulations.
Frico AB
Box 102
SE-433 22 PARTILLE
SVERIGE
22
Thermozone WAC 300
3
/
") and
4
The manufacturer hereby declares that the
following products
WAC301, WAC302, WAC301V, WAC302V,
comply with the following EC-directives.
EC Declaration of Conformity
Defined by the EC Low Voltage Directive
73/23/EEC.
The following harmonised standards are in
use:
SS-EN 60 335-1: 1988, A2, A5, A6,
A51- A54, A56
SS-EN 60 335-2-30: 1992, A51, A52
Complete technical documentation is
available.
EC Declaration of Conformity
Defined by the EC Electromagnetic
Compatibility Directive 89/336/EC och
92/31/EC.
The following harmonised standards are in
use:
SS-EN 50 082-1: 1992
SS-EN 60 555-2/3: 1991
Complete technical documentation is
available.
Partille, 19 januari 1998
Mats Careborg
Technical Manager

Publicidad

loading