Descargar Imprimir esta página

DeWalt DCM581 Traducido De Las Instrucciones Originales página 29

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
10.11.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
SAFETY INSTRUCTIONS

WARNING: When using mains-powered appliances,
basic safety precautions, including the following, should
always be followed to reduce the risk of fire, electric shock,
personal injury and material damage.

WARNING: When using the machine the safety rules must
be followed. For your own safety and bystanders please
read these instructions before operating the machine.
Please keep the instructions safe for later use.
Read all of this manual carefully before operating the appliance.
The intended use is described in this manual. The use of any
accessory or attachment or the performance of any operation
with this appliance other than those recommended in this
instruction manual may present a risk of personal injury.
Retain this manual for future reference.
WALT at
e
SAFE OPERATING PRACTICES
WALT.
e
Training
a ) Read the instructions carefully. Be familiar with the
b ) Never allow children or people unfamiliar with these
c ) Keep in mind that the operator or user is responsible
Preparation
a ) Before use, always visually inspect the machine for
b ) Never operate the machine while people, especially
Operation
a ) Wear eye protection and stout shoes at all times while
b ) Avoid using the machine in bad weather conditions
c ) Use the machine only in daylight or good artificial light.
d ) Never operate the machine with damaged guards or
e ) Switch on the motor only when the hands and feet are
f ) Always disconnect the machine from the power
g ) Take care against injury to feet and hands from the
h ) Always ensure that the ventilation openings are kept clear
i ) When using the brush cutter there is a risk of
j ) Remove any objects that may cause kickback, such as
k ) Check for loose fasteners and damaged parts, such as cracks in
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
controls and the correct use of the machine.
instructions to use the machine. Local regulations can
restrict the age of the operator.
for accidents or hazards occurring to other people or
their property.
damaged, missing or misplaced guards or shields.
children, or pets are nearby.
operating the machine.
especially when there is a risk of lightning.
shields or without guards or shields in place.
away from the cutting means.
supply (i.e. remove the plug from the mains, remove the
disabling device or removable battery)
whenever the machine is left unattended;
before clearing a blockage;
before checking, cleaning or working on the machine;
after striking a foreign object;
whenever the machine starts vibrating abnormally.
cutting means.
of debris.
kickback if it contacts a solid object (tree trunk,
branch, or rock). The unit will kick to the opposite
direction of the brush cutter blade's rotation.
branches and rocks.
the cutting attachment.
EngLIsh
27

Publicidad

loading