Replacing The Shaving Heads - Philips NORELCO 7000 Serie Manual De Instrucciones

Ocultar thumbs Ver también para NORELCO 7000 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
32

Replacing the Shaving Heads

◗ Replace the shaving heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaving heads with
model SH70 Philips Norelco shaving heads
only.
Replacement Shaving Heads
Indication
C
◗ The shaving heads symbol lights up
continuously when the shaver is turned off to
remind you to replace your shaving heads to
obtain optimal shaving results.
C
1
Pull the top portion of the shaving unit
straight off the shaver.
C
2
Turn the retaining ring counterclockwise
2
(1) and lift it off the shaving head (2).
1
C
3
Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
C
4
Place new shaving head in the holder.
Make sure the notches of the shaving head fit
exactly into the projections on the shaving head
holder.
C
5
Hold the shaving head holder in your hand
1
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
6
Repeat this process for the other two
cutters and combs.
7
Reattach the shaving head holder to the
bottom part of the shaving unit.
C
8
To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
7 sec.
ENGLISH
33

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Norelco 7300S7370/84

Tabla de contenido