Accessories And Attachments - Bosch GEX12V-5 Instrucciones De Funcionamiento Y Seguridad

Service
unauthorized per so n nel may result in
misplacing of
components which could cause serious
hazard. We recommend that all tool service
be performed by a Bosch Factory Service
Center or Autho rized Bosch Service Station.
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready to use. It is
recommended that tools with gears be
regreased with a special gear lubricant at
every brush change.
Batteries
Be alert for battery packs that are nearing
their end of life. If you notice decreased tool
performance or significantly shorter running
Dust bag
Sanding disc
Medium backing pad
To avoid accidents always dis connect the tool from the power supply
before cleaning or performing any main tenance.
Preventive maintenance
performed
internal wires

Accessories and Attachments

Included
Maintenance
time between charges then it is time to
replace the battery pack. Failure to do so can
cause the tool to operate improperly or
damage the charger.
by
and Bearings
Bearings which become noisy (due to heavy
load or very abrasive material cut ting)
should be replaced at once to avoid
overheating or motor failure.
Cleaning
plastic parts. Some of these are: gasoline,
carbon tetrachlo ride, chlo rinated cleaning
solvents, ammonia and house hold detergents
that contain ammonia.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not at tempt to clean by inserting pointed
objects through openings.
Additional types of sanding discs
Soft backing pad
Hard backing pad
VAC024 Vacuum hose adaptor
Polishing bonnet
Foam buffing pad
Soft PSA backing pad
Replacement damper ring
Vacuum hoses
-14-
Certain cleaning agents
and sol vents damage
Available separately