Product Description And Specifications - Bosch PBS 75 A Manual Original

Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry surface sanding of wood,
plastic, metal, filler and varnished surfaces with a high ma-
terial removal rate.
Technical Data
Belt sander
Article number
Rated power input
No-load belt speed
Sanding belt length
Sanding belt width
Belt speed preselection
Self-generated/external dust extraction con-
nection
Weight according to EPTA-Procedure
01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according
to EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power
level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑4:
2 2
a = 3,5 m/s , K = 1,5 m/s .
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Auxiliary handle (insulated gripping surface)
(2) Sanding belt
(3) Clamping lever for sanding belt
(4) Belt speed preselection thumbwheel
(PBS 75 AE)
(5) On/off switch
(6) Complete dust box (microfilter system)
(7) Lock-on button for on/off switch
(8) Handle (insulated gripping surface)
(9) Extraction adapter
(10) Extraction outlet
(11) Locking lever for dust box
(12) Filter element (microfilter system)
(13) Adjusting screw for belt running
(14) Protective cap
(15) Dust channel
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PBS 75 A
3 603 BA1 0..
W
m/min
mm
mm
kg
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
English | 13
a)
PBS 75 AE
3 603 BA1 1..
710 750
350 200–350
533 533
75
–
●
3.4 3.5
/ II
1 609 92A 83R | (04.07.2022)
75
●
●
/ II