Product Description And Specifications - Bosch UniversalSander 18V-10 Manual Original

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding and polishing of
wood, plastic, metal, filler and varnished surfaces. It is par-
ticularly well-suited for profiles, corners and hard-to-reach
areas.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Orbital stroke rate preselection thumbwheel
(2) On/off switch
a)
(3) Battery release button
a)
(4) Rechargeable battery
(5) Battery charge indicator
(6) Filter element (microfilter system)
(7) Dust box, complete (microfilter system)
(8) Ventilation openings
(9) SDS slider for sanding plate release
(10) Front sanding plate
(11) Rear sanding plate
(12) Rectangular sanding plate
(13) Handle (insulated gripping surface)
(14) Extraction outlet
a)
(15) Extraction hose
a)
(16) Dust extraction adapter
a)
(17) Sanding sheet
(18) Louvre sanding attachment
(19) Sanding sheet for sanding finger
a)
(20) Sanding finger, flat
a)
(21) Sanding finger, oval
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Bosch Power Tools
Technical Data
Cordless multi-sander
Article number
Rated voltage
Orbital stroke rate
preselection
No-load speed
No-load orbital stroke
rate
Sanding sheet surface
Sanding sheet surface –
rectangular
Orbit diameter
Weight according to
EPTA-Proced-
ure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient tem-
perature during opera-
tion
Recommended re-
chargeable batteries
Recommended battery
chargers
A) measured at 20–25 °C with rechargeable battery PBA 18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
D) The following chargers are not compatible with the PBA re-
Noise/Vibration Information
Noise emission values determined ac-
cording to EN 62841-2-4.
Typically, the A-weighted noise level
of the power tool is:
Sound pressure level
a)
Sound power level
a)
Uncertainty K
Wear hearing protection!
Vibration total values a
sum) and uncertainty K determined
according to EN 62841-2-4:
a
K
V=
A)
min
min
A)
cm
cm
mm
kg
B)
C)
and during storage
D)
6.0Ah.
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector
h
h
1 609 92A 88F | (06.09.2022)
English | 15
UniversalSander
18V-10
3 603 CE3 1..
18
●
−1
5,500–11,000
−1
11,000–22,000
2
104
2
164
1.6
1.3 (2.5 Ah) –
1.7 (6.0 Ah)
°C 0 to +35
°C –5 to +50
PBA 18V...W-.
AL 18...
dB(A) 80 80
dB(A) 88 88
dB 3
2
m/s 7.0 8.0
2
m/s 1.5