Setting The Distance Markers; Cleaning And Caring For The Lcd Monitor; Warranty; Disposal - Dometic PerfectView M55LX Instrucciones De Montaje Y De Uso

PerfectView M55LX, M75LX
8.7

Setting the distance markers

To set the distance markers, proceed as follows (fig. 0, page 5):
➤ Press the "
" button (5) until the "Scale" menu appears.
✓ The distance markers to be set appear.
➤ Press the "+" button (3) to move the red highlighted distance markers.
➤ Press the "–" button (4) to select the next distance marker.
➤ Press the "
" button (5) to exit the settings.
9

Cleaning and caring for the LCD monitor

A
NOTICE! Beware of damage
•
Do not use sharp or hard objects for cleaning, as these may damage the monitor.
•
Remove the cable before cleaning the monitor to prevent short circuiting.
➤ Clean the monitor with a soft, damp cloth from time to time.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and guarantee processing, please send the following items:
•
Defect components
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
11

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
EN
Cleaning and caring for the LCD monitor
21