Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
during 5 seconds after each sampling time (15 seconds).
The temperature measurement range is -50∞C to 70∞C ( -58∞F ~ 158
n
∞F) and the humidity measurement range is (20% ~ 90% R.H.).
HIGH TEMPERATURE/HUMIDITY ALARM SETTING MODE
1. Press 4 times on the Mode key to enter High Temperature/Humidity
Alarm Mode (indicated by the
and
icons on right side of the
screen).
2. Press and hold the Set
o
C/
o
F key to enter High Temperature/Humidity
Alarm setting mode: the
icon will blink.
3. Press Adj. max/min key to toggle the high temperature alarm on
(
icon blinking) or off (no icon).
4. Press Set
o
C/
o
F key to confirm: the high temperature in degrees will
blink.
5. Press Adj. max/min key to set the high temperature value (only if the
high temperature alarm is on).
6. Press Set
o
C/
o
F key to confirm: the high humidity icon
7. Press Adj. max/min key to toggle the high humidity alarm on (
blinking) or off (no icon).
8. Press Set
o
C/
o
F key to confirm: le high humidity level in % will blink.
9. Press Adj. max/min key to set the high humidity value (only if the high
humidity alarm is on).
10. Press Set
o
C/
o
F key to confirm all your settings.
Notes:
If the high temperature and humidity alarm have been activated the icon
n
will be displayed in the time mode.
If temperature/humidity is higher than the set value, an alert will beep
n
during 5 seconds after each sampling time.
STOPPING THE TEMPERATURE OR HUMIDITY ALARM
To momentarily stop the activated alarm, press on SNOOZE.
To stop the alarm definitely, you must turn the temperature/humidity alarm
off by following the procedure stated in the low temperature/humidity alarm
setting mode or the high temperature/humidity alarm setting mode.
Note: if the temperature or humidity alarm goes on and no key is pressed, it
will continue to beep as long as the temperature/humidity remains within the
set alert range.
5
All manuals and user guides at all-guides.com
will blink.
icon
Copyright © Lexibook 2005
INDOOR / OUTDOOR TEMPERATURE MODE
Your unit indicates the temperature inside or outside. To change the
display:
1. Press 5 times on the Mode key to enter indoor / outdoor temperature
mode.
2. Press Adj. max/min key to choose between the display of the indoor or
the outdoor temperature on the LCD screen (the corresponding
icon will blink).
3. Press Mode key to confirm and go back to time mode display screen.
TEMPERATURE AND HUMIDITY HISTORY
To view the minimum and maximum temperature and humidity history,
press Adj. max/min in Normal Time display mode.
Pressing Adj. max/min once will display the maximum values recorded for
the temperature and humidity. Press Adj. max/min twice to view the
minimum values recorded for the temperature and humidity. Press Adj.
max/min a third time to return to the normal time display mode.
Note: the unit starts recording the temperature and humidity values during
your first utilisation. Those records can only be deleted if you reset the unit
(see the getting started section).
CURRENT WEATHER INDICATORS
SUNNY
CLOUDY
The SUNNY , CLOUDLY and RAINY icons indicate the most likely current
weather condition. When it's sunny, Spider-Man feels totally free and plays
with his web; Spider-Man has a super power, thanks to his sixth sens, he
can feel if the weather is changing, and a cloud appears on the screen
when it's cloudy. When it rains, Spider-Man protect himself with his web.
Important note: Lexibook does not pretend in any way to accurately predict
the weather forecast.
6
or
RAINY
Copyright © Lexibook 2005
Publicidad
Tabla de contenido
