Kobalt TOUGH TOOLS K10D-06AB Manual Del Usuario página 9

oPeraTinG insTruCTions
4. Auxiliary Handle
This drill is equipped with an auxiliary handle (J). For
ease of operation, you can use the handle with either the
left or right hand. The handle can be rotated 360°.
To adjust the auxiliary handle assembly:
a. Loosen the auxiliary handle quick-clamp (K) by lifting
the clamp lever up.
b . With the clamp lever open, turn the handle
counterclockwise to loosen the assembly.
c . Attach the auxiliary handle over the sleeve (A) to the
desired operating position.
d . Press the auxiliary handle quick-clamp lever to lock
the auxiliary handle.
e . Hand-tighten the handle by turning the handle
clockwise.
WarninG: For safety and ease of operation,
securely tighten the auxiliary handle by turning the handle
clockwise after you press the quick-clamp lever down.
5. live Wire indicator light
The live wire indicator light (H) is a blue light located in
the handle where the power cord enters the handle. This
blue light is always on when the drill is plugged into a
power source.
4
5
9
K
A
J
H