Operation Instructions - Telstar TAS012112MD Manual De Instrucciones

OPERATION INSTRUCTIONS

FUNCIÓ N
NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.
Operating temperature
Modo
Temperature
Room
Temperature
Outdoor
Temperature
NOTE:
1. Optimum performance will be achieved within these operating temperatures. If air conditioner
is used outside of the above conditions, certain safety protection features might come into
operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over
80%) , condensed water may drip out of the unit. Please sets the vertical air flow louver to its
maximum angle (vertically to the floor), and set HIGH fan mode.
Manual operation
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
Manual
switch
CAUTION:
-This switch is used for testing purposes only. You had better not choose it.
-To restore the remote controller operation, use the remote controller directly.
GUÍ A DE USO
Cooling operation
17 C~32 C O O
(62 F~90 F)
O O
18 43
64 109
18 5 2 64
For special tropical
models
1- Hold the panel sides and lift the front panel up to an angle
until it remains fixed with a clicking sound. For some models,
please use suspension bars to prop up the panel.
2- Once you push the manual switch, the operation mode is
shifted in an order as:
AUTO/COOL AUTO, COOL, OFF. The temperature will be set at
24OC/76OF and the fan on Auto.
3- After operation, close the panel firmly to its original
position.
Healing operation Drying operation
0 C~30 C
O
(32 F~86 F) O
-7
20
126
A/C
TAS012112MD
10 C~32 C
O
O
(50 F~90 F) O
O
24 18 52
7 6 64 126
O
O