Publicidad
Idiomas disponibles
Idiomas disponibles
HOW THE AIR CONDITIONER WORKS?
SLEEP operation
Set
Temperature
1 hour
Cooling
SLEEP operation
7 hours timer off
Set
Temperature
1 hour 1 hour
Heating
DRYING operation
The fan speed will be automatically controlled under dry operation.
During the dry operation, if the room temperature is lower than 10OC(50OF), the compressor
stops operation and restarts until the room temperature is above
12OC (54OF).
Optimal operation
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not torwards people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive
temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start your air
conditioner.
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be
reduced and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
Do not operate unit with horizontal louvre in closed position.
AUTO operation
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating
(cooling/heating models only), or fan only operation
depending on set temperature and the room temperature.
7 hours timer off
The air conditioner will control room temperature
automatically to the temperature point you set.
If you feel uncomfortable in the AUTO mode, you can set
your desired temperature.
1 hour
SLEEP operation
When you push SLEEP button on remote controller
during cooling, heating (cooling & heating models only),
or AUTO operation the air conditioner will automatically
increase (cooling) or decrease (heating)per hour for the
first 2 hours, then hold
steadily for the next 5 hours, after that it will switch off.
This mode saves you energy and brings you comfortat
night.
A/C
TAS012112MD
Publicidad
