Amplifier - Televes 5096 Manual De Instrucciones

User manual

4.3.- Amplifier

1
2
3
4
1.- RF output
2.- Test socket
3.- RF input (other channels for mixing)
4.- RF input (other channels for mixing)
5.- Power connector
6.- Attenuator
7.- Power ON LED
Analogue Channel Processor
E T
- (
5
6
7
234632
25
The amplifier carries out
amplification of the generated channels,
covering a frequency range of 47 - 862
MHz.
It disposes of two input
connectors for the mixing of channels
coming from two systems. If only one of
the inputs is used, it is advisable to load
the unused input with 75 ohm, ref.
4061.
The amplifier disposes of an output
connector and a Test socket (-30dB)
located at the top of the front panel.
The amplifier is powered with 15V via an
eight-wire flat cable, the same type used
for powering the other modules of this
system.
the
signal