Saving Parameters - Televes 5096 Manual De Instrucciones

User manual
5.2.4. - Slope (Video/Audio carrier ratio)
Press again.
The format on the display is SL. 0.:
Press and to select one of the
following permitted values:
0, 1, 2, 3 & 4.
"0" corresponds to the minimum variation,
and "4" to the maximum.
This slope allows an adjustment of 5dB
approx.
Note:
It is advisable to first adjust the slope and
then the output level (this is because,
when the slope is adjusted, it can
sometimes affect the video carrier level).
If is pressed one more time, the Extended
Menu sequence will start again in step a).
Once the desired slope (ratio between
carriers) has been chosen, the selection is
carried out by pressing the
couple of seconds, this immediately returns
the user to the first step of the Normal Menu.
30
Analogue Channel Processor
5.3 Saving the parameters
To save data, press
seconds.
If the saving process has been carried out
correctly, this is indicated by four dashes
button for a that are displayed briefly:
If the configuration data is modified but not
saved, then the previous configuration is
retrieved once 30 seconds have passed.
In other words, those changes that have
been made are cancelled.
for approximately 3