Descargar Imprimir esta página

Brizo SENSORI R66000-WS Manual Del Usuario

Publicidad

Enlaces rápidos

U P
®
ASME A112.18.1 / CSA B125.1
Model/Modelo/Modèle
R66000-WS
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and
maintenance information.
THIS ROUGH-IN BODY MEETS OR
EXCEEDS THE FOLLOWING STANDARDS:
ASME A112.18.1 / CSA B125.1.
Para instalación fácil de su llave Brizo
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
ESTA VALVULA CUMPLE O EXCEDE
LAS SIGUIENTES NORMAS:
ASME A112.18.1 / CSA B125.1.
Pour installer votre robinet Brizo
vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
CE ROBINET SATISFAIT AUX EXIGENCES
DES NORMES ASME A112.18.1 / CSA B125.1
OU LES SURPASSE.
www.brizo.com
C
®
T E FLO N
faucet
®
®
facilement,
®
SENSORI™ ROUGH-IN BODY
CUERPO SENSORI™ PARA LA
INSTALACIÓN DENTRO DE LA PARED
CORPS DE ROBINET SENSORI
NOTICE TO INSTALLER: CAUTION!–As the
installer of this rough-in body, it is your
responsibility to properly INSTALL this rough-
in body per the instructions given. YOU MUST
inform the owner/user of this requirement by
following the instructions. If you or the owner/user
are unsure how to properly install this rough-in body,
please refer to the instructions supplied and if still
uncertain, call us at 1-877-345-BRIZO. Leave this
Instruction Sheet for the owner's/user's reference.
AVISO AL INSTALADOR: ¡PRECAUCIÓN!- Como
instalador de la tubería interna - dentro de la
pared/piso, es su responsabilidad INSTALAR esta
pieza correctamente como se describe en las
instrucciones que le damos. USTED DEBE
informarle al propietario/usuario, siguiendo las
instrucciones dadas, de este requisito. Si usted
o el propietario/usuario no están seguros como se
instalan correctamente las tuberías internas, por
favor refiérase a las instrucciones proporcionadas
y si todavía no está seguro, llámenos al 1-877-345-
BRIZO. Deje esta hoja de instrucciones como ref-
erencia para el propietario/usuario.
AVIS À L'INSTALLATEUR : ATTENTION! – En
qualité d'installateur, vous est tenu de bien
INSTALLER ce corps de robinet conformément
aux instructions. VOUS DEVEZ informer le
propriétaire ou l'utilisateur de cette exigence.
En cas de doute quant à la marche à suivre
pour installer ce corps de robinet, veuillez lire les
instructions fournies et, au besoin, veuillez nous
appeler au 1-877-345-BRIZO. Veuillez laisser
ce feuillet d'instructions au propriétaire ou à
l'utilisateur pour qu'il puisse le consulter s'il y
a lieu.
1
MC
Icons
12/14/11
Rev. D

Publicidad

loading

Resumen de contenidos para Brizo SENSORI R66000-WS

  • Página 1 ASME A112.18.1 / CSA B125.1. y si todavía no está seguro, llámenos al 1-877-345- BRIZO. Deje esta hoja de instrucciones como ref- erencia para el propietario/usuario. AVIS À L’INSTALLATEUR : ATTENTION! – En Pour installer votre robinet Brizo facilement, ®...
  • Página 2 Optional Extension Kit Available - RP72604 Kit opcional de la extensión - RP72604 Kit facultatif de rallonge - RP72604 3 1/4" ± 1/8" 3 1/4 po ± 1/8 po SHUT OFF WATER SUPPLIES. (4) to access mounting holes. Make Consider the type and thickness of your sure the word “UP”...
  • Página 3 Connect valve body, 3/4"-14 NPT inlets, If soldering is required for any connection, to water supplies using the proper fittings. remove bonnet (1), test cap (2), screws Note: (1) is the cold inlet port and (2) is (3) and stops (4) before soldering. the hot inlet port.
  • Página 4 PRESSURE TESTING & FLUSHING THE INSTALLATION Prior to testing, reinstall cap (1), bonnet (2), stops Connect top outlet (1) as shown with (3) and screws (4). Tighten securely. Set stops proper fittings. to full open. Plug outlet with proper fittings; and, check for leaks.
  • Página 5 Replacement Parts Piezas de Repuesto Pièces de rechange RP46078 Test Cap Tapa de Prueba Capuchon d’essai RP22734 Bonnet Capuchón Chapeau RP54910 Stop Tope Butée RP72604 Optional Extension Kit Kit opcional de la extensión Kit facultatif de rallonge Installation reference available on instruction sheet 72971.
  • Página 6 This warranty excludes all industrial, commercial & business usage, whose purchasers are Replacement parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and hereby extended a five year limited warranty from the date of purchase, with all other terms Canada) or by writing to: of this warranty applying except the duration of the warranty.