Before Initial Use - Game ready ATX TRAUMATIC AMPUTEE Guia Del Usuario

BEFORE INITIAL USE

Prime the Wrap using the following steps:
• With the GRPro 2.1 Control Unit
off, attach the Connector Hose to the
Control Unit and the Wrap
• Lay the Wrap open and flat next to
the Control Unit (not on the body)
• Turn the System on and run for 2
minutes with No Pressure
WRAP APPLICATION
Ensure that the Wrap has been applied
1
uniformly against the body with a close and
snug fit.
Attach the Wrap to the Control Unit with the
2
Connector Hose. There should be an audible
"click" . To disconnect, simply press the blue or gray
button and remove the connector from the Wrap.
ABOVE KNEE
BELOW KNEE (LEFT, RIGHT)