Conceptronic CKVM2U Guía De Instalación Rápida página 13

ENGLISH
C. The Setup Window will appear. Click "Install".
D. Choose a destination folder for the KVM switch Software or keep it default.
Note: If you want a shortcut to the software on your desktop, make sure the checkbox on
your screen is checked.
E. Click "Install" to install the Conceptronic USB-KVM Switcher application on your
computer.
F. When the installation is complete, click "OK".
5.2 Configuring the Conceptronic USB-KVM Switch Utility
Before you can use the Conceptronic USB-KVM Switch utility, you need to configure the
application.
A. Open the Conceptronic USB-KVM Switch utility by double clicking on the utility icon in
the task system tray, or by using the right mouse button on the utility icon and choose
"Settings"
B. Once the Conceptronic USB-KVM Switch utility settings screen is open you can configure
the hotkeys (or leave the default settings) to your own preference.
13