Fermax LOFT-COMPACT ADS Manual De Instrucciones página 28

Kit VIDEO LOFT-COMPACT ADS
Kit VIDEO LOFT-COMPACT ADS
BUTTONS
Audio Activation and Auto-on Button
· When a call is received, press the
· With the monitor in standby, press this button for 1 second to switch the monitor on manually. To
activate audio and talk to the visitor, proceed as described previously.
Door release button / guard unit call.
· When in conversation with the Outdoor Panel, press this button to activate the electric lock.
· With monitor in standby, press this button to make a guard unit call (if any).
Hang up button / Main-Secondary camera selection / Menu
· Press to end communication.
· With video, keep the
and secondary cameras (if any) in sequence.
· With the monitor in standby, press for 2 seconds to enter monitor configuration mode. See «Monitor
Settings» section
F1 and F2: Buttons for Additional Functions. (Assigned by the installer).
OPERATION
Answering a call
When the call button is pressed, the Outdoor Panel gives off a call tone at the monitor as well as
the outdoor panel and the screen comes on.
Press the button to talk to the visitor and release it to listen. Communication ends automatically
after 90 seconds or at any time the
Open the door
When a call is received from the outdoor panel, it is possible to open the door at any time by
pressing the
Manual Monitor Activation (Autoswitch-on)
With the monitor in standby, press the
select between the main and secondary cameras (if any) in sequence, keep the
pressed for 2 seconds.
To activate audio and talk to your visitor or open the door, take the steps described above.
If no communication with the outdoor panel takes place, the monitor switches off automatically
after 30 seconds. During communication, it will end automatically after 90 seconds, or when the
button is pressed.
Pag 28
LOFT ADS COMPACT
/ button pressed for 2 seconds to select between the main
.
button.
NOTE:
The monitor screen goes on
once the call from the panel
has ended.
button to talk to the visitor and release it to listen.
button is pressed.
button for 1 second to turn on the monitor manually. To
/ button
ENGLISH