Metra 95-8259B Instrucciones De Instalación página 3

ISO DDIN radio provision
1. Secure the radio brackets to the radio
trim panel using (4) #6 x 3/8" Phillips
truss head screws supplied. (Figure A)
2. Secure the radio to the radio-bracket/
trim assembly using screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.
95-8259B
Kit Assembly
(Figure A) (Figure B)
3