Publicidad
Idiomas disponibles
Idiomas disponibles
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) (4) #6 x 3/8" Phillips screws
A
The World's best kits.
®
Toyota C-HR 2018-up
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted high gloss black
B
C
MetraOnline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
95-8265HG
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 4/20/22 INST95-8265HG
Publicidad
Tabla de contenido
Manuales relacionados para Metra 95-8265HG
Resumen de contenidos para Metra 95-8265HG
- Página 1 With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST95-8265HG...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip and remove the trim panel from around the factory radio, including the clock. (Figure A) 2. Remove (4) 10mm bolts securing the radio, then remove it. (Figure B) Continue to Kit Assembly (Figure B) (Figure A) 386.257.1187 MetraOnline.com... -
Página 3: Kit Assembly
KIT ASSEMBLY 1. Attach the radio brackets to the radio housing trim panel using the (4) #6 x 3/8” screws supplied. (Figure A) 2. Slide the radio into the assembly and secure with the screws supplied with the radio. (Figure B) 4. Locate the factory wiring harness and antenna plug in the dash and make all necessary wire connections to the radio. Metra recommends using the proper mating adapters from Metra and/ or AXXESS. Test the radio for proper operation. 5. Mount the new radio assembly into the dash. 6. Reassemble the dash in the reverse (Figure A) (Figure B) order of disassembly. REV. 4/20/2022 INST95-8265HG... - Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST95-8265HG...
- Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST95-8265HG...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de moldura que rodea el radio de fábrica que incluye el reloj. (Figura A) 2. Quite (4) pernos de 10 MM que fijan el radio. Después, quítelo. (Figura B) Continúe con Ensamble del Kit (Figura B) (Figura A) 386.257.1187 MetraOnline.com... -
Página 7: Ensamble Del Kit
3. Ubique el arnés de cableado de fábrica y el conector de antena en el tablero y realice todas las conexiones necesarias al radio. Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de AXXESS. Pruebe el radio para asegurarse de que funciona bien. - Página 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST95-8265HG...