Korona 82001 Manual De Instrucciones página 29

INSTALLATION OF EXHAUST HOSE
Warning: This appliance should only be connected to a properly installed wall socket
(earthed) and should not be operated by any means of an external timer or separate remote-
control system.
1. Place the appliance on an even, dry and stable surface and close to a properly installed wall
socket.
Adhere to a safety distance of at least 50 cm above and around the appliance.
1. Place the appliance close to a window and properly installed wall socket.
2. Extend the ends of the exhaust hose and attach the window hose adapter at one end and
the air condition adapter to the other end of the exhaust hose.
3. Extend the exhaust hose to its maximum and connect the air condition adapter to the
appliance and lead the window adapter through the whole of the window kit respectively
through the hole of the window sail (see window sail instructions)
ATTENTION: To prevent breaking of the exhaust hose, it can only be twisted or
deformed to a certain limit. The maximal length of the exhaust hose is 150 cm. Do not use
extensions or other exhaust hoses; this can cause serious malfunctions.
• To prevent overheating, the outlet of the device must not be blocked.
Instruction Manual
ENGLISH
29