Cleaning And Care - Korona 82001 Manual De Instrucciones

SLEEPING MODE
The device has a sleep function. If you turn on this function, the device will operate in its most
silent and energy saving mode. Attention: the sleep function only works in the "cOOL" mode.
1. Press the button "sleep" to turn on the sleep function. The device switches to the lowest
and most energy saving mode.
2. Press the button "sleep" again to turn off the sleep function.
TIMER MODE
On hot days, the timer mode enables you to arrive home and find a nice and cooled
down room.
AUTOMATIC TURN ON TIME
When in Off mode:
Press the Timer button and the display starts blinking.
use the uP or Down button to select the desired switch on time. The time setting ranges from
1 to 24 hours.
Once the switch on time is set, the display stops blinking.
If needed, press the Timer button again to adjust the switch-on time .
To switch off the timer function, simply press the Timer button again.
AUTOMATIC TURN OFF TIME
When in Power On mode:
Press the Timer button and the display starts blinking.
use the uP or Down button to select the desired switch off time. The time setting ranges from
1 to 24 hours.
Once the switch of time is set, the display stops blinking.
Press the Timer button again to change the switch off time if desired.
To switch off the Timer function, simply press the Timer button again.
The indicator lights up and timer is set.

CLEANING AND CARE

Clean the air conditioner and filters regularly to maximize performance and efficiency,
and to prolong the appliance's life.
Before cleaning, always switch off the appliance and disconnect it from the mains.
Never immerse the appliance in water. Danger! Electric Shock!
- clean the appliance using a a soft damp cloth.
Never use alcohol, gasoline, and/or any other aggressive cleaning agents/hard objects
that may damage the appliance exterior. Never spray water directly onto the unit.
To remove dust between the vents, use a soft brush or carefully use the vacuum cleaner.
EMPTYING THE WATER TANK
The device has an internal water collection tank. Once, the capacity of water tank is
reached, the appliance stops operating and the indicator light on the control panel
"water full" lights up.
In order to empty the water tank, turn off the appliance and disconnect it from the mains.
- Place the appliance device on an elevation, and place a bucket or any other kind of
container underneath the drainage.
Instruction Manual
ENGLISH
31