Using Your Blender - Hamilton Beach 56209 Manual De Instrucciones

Using Your Blender

IMPORTANT: Your Blender Jar and Cutting Blade Assembly are subject to wear during normal use. Always inspect Jar for nicks, chips, or cracks.
Always inspect Cutting Blade Assembly for broken, cracked, or loose blades. Avoid contact with blades or moving parts. If Jar or Cutting Blade
Assembly is damaged, do not use. Call our toll-free customer service number to obtain replacement parts.
1. Rotate the Collar clockwise
until tight.
2. Place Blender Jar on Base.
5. To use PULSE, press and hold
PULSE button. Blender will
run only when button is held
down.
3. Add ingredients to Jar. Place
Lid on Jar. Plug into outlet.
4. Press the ON/OFF (I/ ) button.
The ready light will flash.
Select cycle to start Blender.
The Blender will not operate
unless the ON/OFF (I/ ) button
is pressed first.
6. The SMOOTHIE program
pulses to crush ice, switches to
LOW to mix, and then ramps to
HIGH for smoothness. After the
45-second cycle, the Blender
will stop automatically.
5