Using Your Blender - Hamilton Beach 53604 Manual Del Usuario

Using Your Blender

6
1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar
before twisting collar
onto bottom of jar. Add
Ingredients.
4. Plug into outlet. Press
ON(I)/OFF( ) switch to turn
on power to the blender. The
control panel will flash and
PULSE/CANCEL button will
continue to flash, indicating
blender is ready for blending.
Press ON(I)/OFF( ) switch
to OFF ( ) position anytime
machine is left unattended.
IMPORTANT: The blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call toll-
free customer service number to obtain replacement parts.
2. Place lid on jar. Place blender
jar on base.
SMOOTHIE SETTING: Program is optimized to blend frozen or fresh
smoothie recipes at select speeds and for a preset time. The blender
automatically stops at the end of the program. Some recipes may
require more or less blending time.
3. Close quiet shield.