Using Your Blender - Hamilton Beach 54210 Manual De Instrucciones

Using Your Blender

1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar
before twisting collar onto
bottom of jar. Place blender
jar on base.
2. Plug into outlet. Add
ingredients to jar. Place lid
with filler cap securely onto
blender jar. Select Low or
High and push function
button. When using pulse
button, blender will operate
as long as button is pressed.
Remaining speed buttons will
run blender until OFF ( ) is
pressed.
IMPORTANT: The blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
tollfree customer service number to obtain replacement parts.
OPTIONAL
w WARNING
3. Burn
Hazard. Do not fill blender jar
with hot liquid beyond 3-cup
(710-ml) level. With protection
of an oven mitt or thick towel,
place one hand on top of
lid. Keep exposed skin away
from lid. Start blending at
lowest speed.
4. At the end of blending cycle,
press OFF ( ) button to stop
blending and unplug blender.
5. Remove blender jar from
base. Remove lid to pour.
5