The Radio; Direct Tuning/Automatic Presetting/Manual Presetting/Selecting Channels; Manual Presetting; Selecting Channels - Panasonic SA-HR50 Instrucciones De Funcionamiento

The radio

TUNER
RECEIVER
SYSTEM
^
BAND
TUNER
1 2 3
BAND
1
4 5 6
4
7 8 9
7
-/--
AUTO SETUP
0
10
>
=
SKIP
u
SKIP
STOP
u i
g
DIRECT NAVIGATOR
TOP MENU
TUNER
DIRECT TUNING
SUB MENU/
PLAY LIST
-EFFECT
C.FOCUS
OFF
%PL
Direct tuning
Input the frequency of the station.
Remote control
1. Press [TUNER, ―BAND] to select "TUNER".
2. Press and hold [TUNER, ―BAND] to select "TUNER
FM" or "TUNER AM".
3. Press [TUNER DIRECT TUNING].
4. Press the numbered buttons to enter the
frequency.
e.g. To select 107.90 MHz, press [1] → [0] → [7] → [9] → [0]
• If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
• If the frequency has not been input correctly, "ERROR" will be
displayed.
Automatic presetting
The FM stations the unit can receive are preset in channels 1 to
30. The AM stations the unit can receive are preset in channels
21 to 30 (FM stations are replaced if any were preset in these
channels).
Preparation: Tune to either FM 87.50 MHz or AM 522 kHz.
Main unit
1. Press [-MENU] to select "TUNER" ➡ "AUTO
MEMO".
2. Press [TUNE - or +] to select "START" ➡ [ENTER].
Select "CANCEL" to cancel.
The tuner presets all the stations it can receive into the channels
in ascending order.
During automatic presetting, the memory indicator (M) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting
finishes.
To change the AM frequency step
If the correct AM frequency cannot be tuned in, change the frequency step to suit your area.
Main unit
1. Press [-MENU] to select "TUNER" ➡ "AM STEP".
2. Press [TUNE - or +] to select "AM STEP 9 kHz" or "AM STEP 10 kHz" ➡ [ENTER].
16
16 16
SA-HR50 (RQTV0259-E).indb 16
TV
AV
TV
^
VOLUME
BD/DVR
DVD-P
TV/AV
2 3
VOLUME
5 6
8 9
-/--
MUTING
0 >
10
=
SLOW/SEARCH
i t y
PAUSE PLAY
h q
FUNCTIONS
1
TUNER
DIRECT TUNING
OK
RETURN
Press [INPUT SELECTOR < or >]
-LEVEL
to select "TUNER FM" or "TUNER
TEST
AM".
MUSIC MOVIE
SFC
MENU TUNE
SETUP ENTER
RETURN
SETUP MIC
MENU ENTER
SETUP
RETURN
2
INPUT SELECTOR
Select the frequency.
Auto tuning starts if you press and
hold the button.

Manual presetting

Preset the stations one at a time.
Preparation: Tune to the station you want to preset.
Main unit
1. Press [-MENU] to select "TUNER" ➡ "MEMORY".
2. Press [TUNE - or +] to select the channel
➡ [ENTER].
("STORED" lights.)
For your reference
FM stations can also be preset in the MONO mode.

Selecting channels

Remote control
1. Press [TUNER, ―BAND] to select "TUNER".
2. Press [SKIP 2 or 1].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [ ≧10, -/--], then the two digits.
e.g. To select channel 21: [ ≧10, -/--] → [2] → [1]
Main unit
1. Press [-MENU] to select "TUNER" ➡ "TUNE
MODE".
2. Press [TUNE - or +] to select "PRESET"
➡ [ENTER].
Select "MANUAL" to cancel.
3.
After exiting the menu:
Press [TUNE - or +].
AUTO
SPEAKER SETUP
INPUT SELECTOR VOLUME
TUNE
8/24/2007 10:10:55 AM