Radio Operation - Jensen VM8113R Instrucciones De La Instalación Y Operación

RADIO OPERATION

1
DISP
DIM
SRC PTY
BAND
iPod Menu
Accessing Radio Mode
Press the SRC button (6) on the front panel or remote control (14) to switch
to the RADIO source.
1 7 3
Radio FM-1
ST
P1 87.5 MHz
P2 90.1 MHz
PS: SO SMALL
5
1. Stereo Reception Indicator
2. Radio Station Frequency
3. AM/FM Band
4. Time/Clock
5. RDS Information
6. Current Preset Channels
7. Source Indicator
8. PTY Indicator
VM8113R
INT
1 2
RPT RDM
3 4
DN UP
5
6
A/V IN
2 8 4
01:02
87.5 MHz
PTY
6
Select a Band
Press the BAND button (3) to change between three FM and two AM
bands. Each band stores up to six preset stations.
Tuning
Seek Tuning
Press the TUNE/TRACK >>| or |<< buttons (17) to seek the next/previous
station automatically.
18
Manual Tuning
Press and hold the TUNE/TRACK >>| or |<< buttons (17) to enter Manual
tuning mode. Press the buttons again to move the radio frequency number
up or down one step.
Program Information
To view available program information, press the PTY button (14) on the
control panel. Press repeatedly to choose between Program Type (PTY)
category, Program Service station call letters (PS), and Radio Text (RT).
PTY Search
To view the Program Type categories, press and hold the PTY button (14)
on the control panel. Program type categories are listed at the bottom of the
screen, allowing listeners to find similar programming by genre. Press the
TUNE/TRACK >>| or |<< buttons (17) to select a category. After a few
seconds, the radio will start scanning for stations broadcasting in the
selected category.
Preset Stations
Up to six stations on each band can be stored as presets, which can then
be instantly recalled by pressing the associated preset button (8-13). To
store a station, turn the radio on and select the desired band and station.
Press and hold the desired preset button (numbered one through six on the
face of the radio or remote control) for more than two seconds. When
stored, the preset number will appear in the display. The station is now
stored and can be recalled by pressing the corresponding preset button.
Repeat for the remaining five presets on the current band and for presets on
the other four bands.
Preview Scan
Press the button (16) to scan and play all strong stations for 5 seconds
each. Press again to stop scanning and play the current station.
8
VM8113R