Important - Lenco MPR-034 Manual De Usuario

OPERATING INSTRUCTION
Battery Supply
Open the battery compartment and insert as indicated in the compartment one Rechargeable
Battery, Li-ion 3.7V
Battery Charging
Connect the unit by inserting the USB cable into DC 5V IN jack, and inserting the other end into
the USB interface or USB charger. The charging time is around 2 hours. The charging indicator
will flash during battery charging.
To use a 5V AC/DC adapter for external DC charging, plug the connecting cable to the DC jack.
AC adapter is not delivered. Do not charge the battery with the AC/DC adapter for more than
24 hours.

IMPORTANT

If the unit has not been used for a long period of time, the rechargeable battery may be
completely discharged into a "sleep mode" condition. This is the characteristics of all the
rechargeable battery. For the first time to recharge (to wake up) the battery, it is recommended
to charge for a period exceeding 5 hours but not exceeding 24 hours.
Radio
1. Press POWER to switch on the radio.
2. The display shows the radio station details throughout the radio mode.
3. Select your station by using TUNING 10+ or TUNING 10-
4. Adjust the sound with VOLUME+ or VOLUME-.
5. To switch off the radio, press POWER once.
Tuning
Manual tuning
Press TUNING 10+ or TUNING 10- briefly, once or more until the right frequency is found.
Automatic tuning
1. Press and hold down TUNING 10+ or TUNING 10- until the display frequency starts to run.
2. When a station of sufficient strength has been found tuning stops, or you can stop
automatic tuning by pressing TUNING 10+ or TUNING 10- again.
Radio Preset
You can store the frequencies of up to 50 radio stations in the memory. A stored frequency can
be erased from the memory by storing another frequency in its place.
Automatic Preset
1. Press and hold down PROGRAM until the display frequency starts to run.
6