Important - Lenco SCD-33 Manual De Usuario

Sound input function (AUX in)
1. The player can play the audio of various sound sources, such as smartphone, MP3 player etc.
2. Move the function switch (20) to the "AUX" position, Insert the 3.5mm jack of the sound source into the
AUX (19) input. The unit will automatically switch to AUX mode and "AU" will be shown on the LCD
display.
HOW TO OPERATE THE RADIO
1. Set the function button (20) to the "RADIO" position.
2. Set the band switch (25) to FM or AM, as desired.
3. Adjust the volume (21)
4. Turn the tuning dial (24) to adjust FM or AM reception, this device has an internal antenna. If radio
reception is bad, use it on another location with stronger signal.
USB & MEMORY CARD MP3 PLAYBACK FUNCTION
1. Set the function switch (20) to the USB/CARD position.
2. Insert an USB memory stick into the USB port (17) or insert an SD/MMC card into the card slot (16)
3. Press the BT/CD/MP3/USB/SD CARD button (8) until "USB" is displayed on the LCD (when an USB
memory stick is inserted) or "CARD" (when SD/MMC card is inserted) is displayed on the LCD.
4. Press PLAY/PAUSE (7) button to pause the music playback, the LCD display flashes to show that the
music is on pause. The music will continue after repressing the PLAY/PAUSE (7) button and the
display will stop flashing.
5. During music playback, you can press the REPEAT (3) button once to repeat the current track.
Pressing it a second time will repeat all tracks and pressing it a third time will repeat the current
folder
6. During music playback, press PREV (5)/NEXT (6) button to jump to the previous/next song. Hold
down the PREV (5)/NEXT (6) button to fast rewind or forward
NOTE: Before removing the USB stick or SD/TF card from this unit, be sure to turn off the power first to
prevent that any surge could damage the USB stick or SD/TF card.
IMPORTANT: The USB port is intended only for data transfer only, other devices cannot be used with this
USB connection. The use of USB extension cords is not recommended.
7