For Products With A Water Dispenser/Ice; Machine - Beko BFSB3622XSS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety instructions
If there is a blue light on the
refrigerator, do not look at this light
with optical tools.
Exposing the product to rain, snow,
sun or wind is dangerous in terms of
electrical safety.
In products with mechanical control
(thermostat), wait for 5 minutes to plug
in the product again after unplugging.
Do not overload the refrigerator.
down when the door is opened,
placed onto the product.
If the product has a door handle, do not
pull the handle when re-locating the
product. The handle might be loose.
other body part in the moving parts of
the refrigerator.
Do not put your hand or any other
foreign materials into the ice machine
while it is operating.
1.1.1 Hydrocarbon (HC) Warning
If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep the
product away from potential fire sources
that may cause it to catch fire and
ventilate the room where the product is
placed.
If the product is damaged and
if you see gas leak, please
C
keep away from the gas. It may
cause frostbite when it gets into
contact with the skin.
(including R134)
Refrigerator / User Guide
C
Ignore this warning if the cooling
system of your product contains
R134a.
Type of gas used in the product
C
is stated on the type plate which
is on the left wall inside the
refrigerator.
A
WARNING:
Never throw the product into fire
for disposal.
1.1.2 For Products with a Water
Dispenser/Ice Machine
Use only drinking water. Do not fill the
beverages, alcoholic beverages or any
other liquids incompatible for use in the
water fountain. This may cause risk to
your health and safety.
Do not allow the children to play with
the water dispenser or Ice Maker to
Do not insert your fingers or other
dispenser, ice channel or inside the
container of the Ice Maker. This may
Pressure for cold water inlet shall be
maximum 90 psi (620 kPa). If your
water pressure exceeds 80 psi (550
kPa), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.
If there is a risk of water impact in
your installation, always use a water
impact protection equipment in that
installation. Please consult professional
plumbers if you are not sure if there is
water impact in your installation.
5 / 28 EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido