Changing The Network Configuration - Conceptronic Home Media Store CH3HNAS Manual De Usuario Ampliado

4.3.2 Changing the network configuration

 Select "GENERAL" in the top bar of the configuration page.
 Select "NETWORK" in the left bar of the configuration page.
The „NETWORK‟ configuration will be shown on your screen:
By default, the Home Media Store is set to a „Dynamic IP (DHCP)‟ configuration. This means that the
Home Media Store will check if there is a DHCP server in your network which provides an IP address to the
Home Media Store. In most situations, a router is acting as DHCP server in your network.
A DHCP server is not always giving the same IP address to the same network device. If this happens with
the Home Media Store, it is possible that you cannot reach the Home Media Store anymore through your
network.
Therefore, it is strongly recommended to assign a static IP address to the Home Media Store, allowing you
to access the device everytime on the same IP address.
ENGLISH
63