Conceptronic Home Media Store CH3HNAS Manual De Usuario Ampliado página 67

Single Disk
To format your hard disks as single disks, click the "Format" button behind each hard disk in the
„Available Volumes‟ section. The Home Media Store will ask for a confirmation before the format is
started.
When the format is finished, the Home Media Store will show a notification popup telling that the format
is completed.
JBOD
To format your hard disks as a JBOD volume, select "JBOD" and click the "Create" button in the
„Harddisk options‟ section. The Home Media Store will ask for a confirmation before the JBOD volume is
created and the format is started.
When the format is finished, the Home Media Store will show a notification popup telling that the format
is completed.
RAID 0
To format your hard disks as a RAID 0 volume, select "RAID 0" and click the "Create" button in the
„Harddisk options‟ section. The Home Media Store will ask for a confirmation before the RAID 0 volume
is created and the format is started.
When the format is finished, the Home Media Store will show a notification popup telling that the format
is completed.
RAID 1
To format your hard disks as a RAID 1 volume, select "RAID 1" and click the "Create" button in the
„Harddisk options‟ section. The Home Media Store will ask for a confirmation before the RAID 1 volume
is created and the format is started.
When the format is finished, the Home Media Store will show a notification popup telling that the format
is completed.
Once the hard disk(s) are formatted, the Home Media Store creates a shared folder called „Public‟, which
can be accessed by anyone in your network.
 To start using the „Public‟ share on the Home Media Store without creating additional users and
shares, continue to chapter 5.
 If you want to create additional users and shares with user rights, continue to chapter 4.3.4 to
start creating users for the Home Media Store.
ENGLISH
67