Conceptronic Home Media Store CH3HNAS Manual De Usuario Ampliado página 81

The UPnP A/V service is disabled by default. You can enable the UPnP A/V service by selecting a folder
which you want to assign the UPnP A/V service.
 Select a folder from the „UPnP folder‟ section by checking the checkbox in front of the folder.
The Home Media Store will ask you „Are you sure?‟.
 Select "Yes" to assign the folder to the UPnP A/V service.
The „Service status‟ will change from „Disable‟ to „Enable‟, indicating that the UPnP A/V service is
active.
Media rescan
By default, the Home Media Store will check every 25 minutes if there is new multimedia content in the
assigned folder.
This means that if you put multimedia files in the assigned folder, it can take up to 25 minutes before you
can see the files on your UPnP A/V client.
 You can change the „Default rescan time‟ by selecting a different rescan time from the dropdown
menu.
 Click "Apply" in the „UPnP service configuration‟ to save the changed rescan time.
To force a rescan, you can click the"Rescan" button in the „UPnP service configuration‟ to start
rescanning the assigned folder immediately.
Tip: If you want to save power by shutting down the hard disk(s) when not in use, it is recommended to
set the Home Media Store to rescan less often.
ENGLISH
81