Sliders - Subzero MiniCommand Manual Del Usuario

Sliders

Operating a slider will transmit a control change
message. You can enable/disable each slider,
specify its control change number, and specify the
values transmitted when the slider is moved fully
upward or fully downward.
Slider Enable [Disable/Enable]
Enables or disables the slider. If you've disabled a
slider, moving it will not transmit a MIDI message.
Control Change Number [0 to 127]
Specifies the control change number of the control
change message that is transmitted.
Upper Value [0 to 127]
Specifies the value of the control change message
transmitted when you move the slider all the
way upward.
Lower Value [0 to 127]
Specifies the value of the control change message
transmitted when you move the slider all the
way downward.
10