Knobs - Subzero MiniCommand Manual Del Usuario

Knobs

Operating a knob will transmit a control change
message. You can enable/disable each knob,
specify its control change number, and specify the
values transmitted when the knob is turned fully left
or fully right.
Knob Enable [Disable/Enable]
Enables or disables the knob. If you've disabled a
knob, turning it will not transmit a MIDI message.
Control Change Number [0 to 127]
Specifies the control change number of the control
change message that is transmitted.
Left Value [0 to 127]
Specifies the value of the control change message
transmitted when you turn the knob all the way to
the left.
Right Value [0 to 127]
Specifies the value of the control change message
transmitted when you turn the knob all the way to
the right.
9