Parts And Functions - Subzero MiniCommand Manual Del Usuario

PARTS & FUNCTIONS
3
8
6
5
7
4
1. Trigger pads
These pads can transmit note messages or
control change messages. The pads are backlit.
Use the MINI software editor to change the
individual backlight colour of the pads.
2. Keyboard
There are 25 velocity-sensitive keys that transmit
note messages. When CC mode is on, they
transmit control change messages.
3. MIDI control group
A knob and slider are collectively called a
MIDI control group. The MINI has four MIDI
control groups.
4. [OCTAVE DOWN] / [OCTAVE UP]
The [a] button and the [d] button can be
used to adjust the octave. The pitch will shift
downward by one octave each time you press
the [a] button. The pitch will shift upward by one
octave each time you press the [d] button.
5. Bank button
The MINI has four banks. When the bank button
is on, you can use the [a] button and the [d]
button to switch between the four banks.
A "bank" is a set of parameter assignments for
the controllers. You can use MINI Software Editor
to change the assignment of each controller.
(For further information, see chapter "Making
detailed settings")
6. Program button
When program button is on, you can use
the [a] button and the [d] button to change
the program.
7. [PITCH DOWN] / [PITCH UP]
The [PITCH DOWN] button and the [PITCH UP]
button can be used to send a note's pitch up or
down in cents.
8. Modulation button
The MOD button is used to introduce a
modulation effect.
9. USB connector
Connect the MINI to your computer with the
provided USB cable via this port.
6
1
2