Edit Mode - Subzero MiniCommand Manual Del Usuario

Keyboard operation in Edit mode
The 25 keys of the keyboard can function as
independent buttons to transmit control change
messages. You can specify which MIDI channel
the control change message is transmitted on, set
if each key is enabled, the key type and the control
change number, as well as the On and Off value.
CC MIDI Channel [1 to 16]
This specifies the MIDI channel that control
change messages will be transmitted on.
Set this to match the MIDI channel of the
application you're controlling.
Key Enable [Disable/Enable]
Enables or disables the key. If a key is disabled,
operating that key will not transmit a MIDI message.
Key Behavior [Momentary/Toggle]
Selects one of the following two modes:
Momentary Pressing the key will send a control
change message with the On value. Releasing
the key will send a control change message
with the Off value.
Toggle Each time you press the key the control
change message will alternate between the On
value and the Off value.
Control Change Number [0...127]
Specifies the CC number of the control change
message that will be transmitted.
On Value [0...127]
Specifies the On value of the control
change message.
Off Value [0...127]
Specifies the Off value of the control
change message.
11