Glacier bay 873W-3001 Guía De Uso Y Mantenimiento página 7

Installation (continued)
5
Installing the plaster guard
□
Place the plaster guard (O) onto the body (K)
and secure with the screws (N).
N
O
K
6
Installing the shower arm
□
Screw the connector (E) into the pipe inside
the wall.
□
Insert the shower arm (C) into the connector (E)
and tighten the set screw (D) with the Hex
wrench (Hex: 3.2mm) provided.
□
Wrap thread sealant tape around the pipe
threads of the tub spout outlet (1, not included)
in a clockwise direction, as shown.
□
Connect the tub spout outlet pipe (the tub
spout outlet pipe should project 1-3/16 in. to 3 in.
from the nished wall) to the lower pipe elbow
(2, not included). Tighten the elbow and tub
spout outlet pipe connections with a strap
wrench.
D
1-3/16 in. to 3 in.
7
Please contact 1-855-HD-GLACIER for further assistance.
E
C
2
1
Wall
HOMEDEPOT.COM