Glacier bay 873W-3001 Guía De Uso Y Mantenimiento página 8

Installation (continued)
7
Installing the tub spout
□
Place the spout (M) onto quick connection until
the spout (M) becomes ush with the nished
wall and tighten the screw (1) with with the
Hex wrench (Hex: 3.97mm) provided.
M
1
8
Removing the plastic cap
□
Before installing the escutcheon (J), remove the
plastic cap from the valve body (K) by twisting
the cap in a clockwise direction.
8
K