Prebena MOBILO 300 Manual Del Usuario página 61

Controlling operating pressure
You can control the operating pressure on the operating pressure
controller (7.).

Set the operating pressure such that the operating pressure
desired for the application is just obtained. This offers the
following advantages:
 You save energy (compressed air),
 You reduce the noise level, and
 You reduce the wear on the accessory unit.
To adjust the operating pressure, proceed as follows:
 Hold the pressure equipment so that you can easily read the
pressure gauge (6.) for the operating pressure.
 Pull the operating pressure controller (7) up and away from the
pressure gauge.
 Turn the operating pressure controller until the pressure gauge
dial (6.) stands at about 5 bar:
The average operating pressure is now set.
Adjust the desired operating pressure as below:
 To increase the operating pressure, turn the operating pressure
controller (7.) clockwise.
 To decrease the operating pressure, turn the operating pressure
controller (7.) anticlockwise.
Using the pressure equipment
21