Using the pressure equipment
You can operate the pressure equipment in the metal transport case
or the carrier bag directly on your body. Both alternatives facilitate
efficient and effective operation of pressure equipment independent
of a stationary source of compressed air.
Operation in the metal transport case
To operate the pressure equipment in the metal transport case,
proceed as follows:
Place the transport case in a horizontal position with the lid facing
upwards. Open the transport case and the latch for the lid.
Connect the compressed air supply to the pressure equipment as
described on page 16.
Push the fitting of the connection hose (2.) onto the quick coupler
of the pressure equipment tapping point (5.) until it engages
audibly.
Using the pressure equipment
19