After Operation; Disconnect The Compressed Air Supply - Prebena MOBILO 300 Manual Del Usuario

After operation

After use or prior to prolonged shut-downs, perform the steps
described below.

Disconnect the compressed air supply

Remove compressed air cartridge
 Unscrew the compressed air cartridge from the thread of the
fitting (12.).
The compressed air contained in the pressure equipment escapes
audibly.
 Screw the stoppers into the fitting thread.
 Screw the seal cap onto the compressed-air cartridge.
 Store the compressed air cartridge protected against impacts and
dropping in the supplied transport case.

You can refill the compressed air cartridge using the PKT-
FILLMASTER 350 and PKT-FILLMASTER 400 compressors,
which are available as an accessory. You can also purchase a
full compressed air cartridge in exchange for an empty
cartridge from your dealer.
After operation
23