Kd-65Xh92Xx / 65Xh90Xx / 55Xh92Xx; Ke-65Xh92Xx / 65Xh90Xx / 55Xh92Xx / 55Xh90Xx; Fw-65Bz40H / 55Bz40H - Sony SU-WL450 Manual Del Usuario

3
Preventing the bottom of the TV
or LCD Monitor from shifting.
 Take up the slack of Belt  and attach it
to the wall tightly.
2-a

 Use a 5 mm diameter screw or
equivalent (not supplied).
Note
 Try to pull the bottom of the TV or LCD Monitor
towards yourself slightly, to make sure that it does
not move forward. If there is any movement, it is not
fixed correctly, and the Belt  should be secured
firmly again.
KD-65XH92xx / 65XH90xx /
55XH92xx / 55XH90xx
KE-65XH92xx / 65XH90xx /
55XH92xx / 55XH90xx

FW-65BZ40H / 55BZ40H

WARNING
 Be sure that two or more persons (three or more
persons for 75 inches and above TV or LCD Monitor
set) hold the TV or LCD Monitor when carrying it.
2-b

− 18 (GB) −
1
Lift the TV or LCD Monitor.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Installing the
Wall-Mount Bracket to the wall" on
page 10.
 Make sure that the rear of the TV or LCD
Monitor touches the Base or Base
Adaptor when holding the TV or LCD
Monitor.
Note
 Hold the TV or LCD Monitor securely with both hands.
2
Install the TV or LCD Monitor
onto the Base or Base Adaptor.
 Gently slide down the TV or LCD Monitor
and hang the Pulleys  attached to the
rear of the TV or LCD Monitor to the Base
or Base Adaptor, making sure to confirm
the shape of the holes.
 After installing the TV or LCD Monitor on
the wall, confirm the Pulleys  are firmly
latched into the Base or Base Adaptor.
 Release both hands slowly to ensure
that the TV or LCD Monitor does not fall.
