Carson Reflex Wheel X1 Manual De Instrucciones página 19

TRANSMITTER ADJUSTMENT
Left
FAIL SAFE FUNCTION SETTING
1. Set the TH, ST switches to the normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver should start
flashing rapidly.
BINDING THE TRANSMITTER AND RECEIVER
1. Turn on the receiver power. Press the SW
switch. The receiver's LED should start
flashing.
Neu
tral
Right
Brake/
Speed down
Forward/
Speed up
2. Turn on the
transmitter.
1. Push the trigger forward to slow down or
brake.
2. Pull the trigger backward to accelerate.
Throttle Trim:
Steering trim
Trim the throttle servo slightly when the
(ST)
trigger is at the neutral position.
Throttle trim
Steering Trim:
If the front wheels do not align straight, use
(TH)
the steering trim to adjust.
ATTENTION
Keep the transmitter and receiver 40 cm
apart when operating. Use the REV switches
to reverse the steering or throttle operating
direction.
LOW BATTERY ALARM
Do not operate the radio system when the
battery power is low.
4. Put the throttle trigger at the brake position, press the F/S SET
button, the LED should become solid.
5. For electric model, put the throttle trigger at the stop position
when you are making the setting.
3. When the LED on the receiver becomes
solid, the binding process is completed.
19 // GB