Cleaning & Maintenance - Nostalgia Products Taco Tuesday TTMS56LG Instrucciones Y Recetas

Máquina de margarita y aguanieve
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING & MAINTENANCE
1.
After using your MARGARITA & SLUSH MAKER, disconnect the unit from
the electrical outlet. Remove plug by gripping the plug body and pulling
out of the outlet. Never yank or twist cord to unplug the unit.
2.
Thoroughly wash the Pitcher, Pitcher Lid, Blending Blade, Blending Base,
Ice Tray, Ice Compartment Lid and Water Reservoir in warm, sudsy water
and thoroughly dry. DO NOT put the Base in water. To clean the Base, use
a damp cloth to wipe the exterior and dry with a clean, dry towel.
3.
Once washing and drying is complete, reassemble your MARGARITA & SLUSH
MAKER. Wind the cord and return to the convenient storage location at the back of
the Motor Base. Now your MARGARITA & SLUSH MAKER is ready to use again.
Changing the Blade
CAUTION: BLADE IS EXTREMELY SHARP! Use extreme caution when removing and
handling the Blade.
Once blade becomes dull, it will need to be changed. You may also want to
periodically take apart the Ice Shaving Chamber to clean all of the parts inside.
Blade Housing
Removing the Blade:
1.
Begin by removing the Ice Shaving Compartment from the top of the unit. Compartment
can be removed by pushing the tab at the rear of the unit and lifting up.
2.
Turn the Spinner counterclockwise to unlock. Lift up the Spinner to remove.
3.
Carefully press tabs of Blade Housing inward and lift up.
4.
Twist off Blade Cap to release the Blade.
Blade
Blade Cap
Spinner
8

Publicidad

Tabla de contenido
loading

Tabla de contenido