Using The Self-Timer; Using Olympus Master - Olympus FE-5010 Manual Básico

Ocultar thumbs Ver también para FE-5010:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Shooting closeups ( Macro shooting)
This function enables the camera to focus and shoot
subjects at close distances.
1
Press the & button.
2
Use mn to select the setting option, and
press the B button to set.
Option
OFF
Macro mode is deactivated.
This enables shooting as close as 10 cm/
MACRO
*1
3.9 in.
(60 cm/23.6 in.
SUPER
This enables shooting as close as
MACRO
*3
3 cm/1.2 in. to the subject.
*1
When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3
The zoom is automatically fi xed.

Using the self-timer

After the shutter button is pressed all the way down,
the picture is taken after a short delay.
1
Press the Y button.
2
Use kl to select the desired setting
option, and press the B button to set.
Option
OFF
The self-timer is deactivated.
The self-timer lamp turns on for approx. 10
ON
seconds, then blinks for approx. 2 seconds,
and then the picture is taken.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
Press the Y button again.
Printing
Printing images at the printer's
standard settings [EASY PRINT]
1
Display the image to be printed on the
monitor.
Printing can also be started when the camera is
turned off. After performing Step 2, use kl to
select [EASY PRINT], press the B button. Use mn to
select an image, and proceed to Step 3.
2
Turn on the printer, and then connect the
printer and camera.
Description
*2
) to the subject.
Description
Multi-connector
USB cable (supplied)
EASY PRINT START
PC / CUSTOM PRINT
3
Press the n button to start printing.
4
To print another image, use mn to select
an image, and press the B button.

Using OLYMPUS Master 2

System requirements and
installation of OLYMPUS Master 2
Install the OLYMPUS Master 2 software by referring
to the included installation guide.
Connecting the camera to a computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
The camera automatically turns on.
Multi-connector
USB cable (supplied)
USB
n button
OK
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
OK
5
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

X-915Fe-5000X-905

Tabla de contenido