jbc PHS-KB Manual De Instrucciones página 3

Features
Heater Unit
Console socket
connection
Console
Auxiliary Thermocouple (Type K)
Input
4 4 4
Heating Area
Zone B
Fixing brackets
Zone A
for PHS-SA
IR Preheater Support
Mains Mains
input switch
Pedal socket connection (optional)
Control Unit
USB-B connector to PC:
- Update the Control Unit
software
Thermocouple
(Type K)
IR Preheater Support
Height Adjustment
The PHS-SA allows adjustment for 3 heights between the board and the Heating Area.
· Low level
For PCBs of 0.8-2.4mm thick.
· Medium level
For PCBs of 2.4-6mm thick.
· High level
For PCBs over 6mm thick.
w w w.jbctools.com
Slot Clamps
For fixing
irregular
shaped
PCBs to the
support.
For fixing identical PCBs
in the same position.
28mm
50mm
70mm
5 5 5