DT SWISS O.D.L Race Manual Del Usario página 21

5.2 Adjusting the air pressure in the fork
The values recommended here are merely guideline values. The air pressure should be adjusted
in accordance with the rider's personal preferences and via the correct SAG.
Rider weight
(rider with equipment)
[kg / lbs]
40 / 88
45 / 99
50 / 110
55 / 121
60 / 132
65 / 143
70 / 154
75 / 165
80 / 176
85 / 187
90 / 198
95 / 210
100 / 220
105 / 232
110 / 245
Max. air pressure
5.3 Increasing the air pressure
1. Set the fork to "OPEN" mode (see chap.5.5).
2. Unscrew the valve cap on the fork.
3. Screw on the pump and pump the fork up to the required
pressure.
Note the instructions issued by the pump's manufac-
turer!
When using the DT Swiss shock pump, see chap.4.
4. Unscrew the shock pump and screw the valve cap onto
the valve.
5.4 Reducing the air pressure
1. Set the fork to "OPEN" mode (see chap.5.5).
2. Unscrew the valve cap on the fork.
3. Press the valve insert with the back of the valve cap.
or
Screw on the shock pump and reduce the air pressure by pressing the release valve on the
shock pump (see chap.4).
Travel
100 mm
Recommended air pressure [bar / psi]
3.4 / 49
3.8 / 54
4.1 / 60
4.5 / 65
4.8 / 70
5.2 / 75
5.5 / 80
5.9 / 86
6.3 / 91
6.6 / 96
7.0 / 101
7.3 / 106
7.7 / 111
8.0 / 117
8.4 / 122
12 / 174
120 mm
3.3 / 48
3.7 / 53
4.0 / 58
4.4 / 63
4.7 / 69
5.1 / 74
5.4 / 79
5.8 / 84
6.2 / 89
6.5 / 94
6.9 / 100
7.2 / 105
7.6 / 110
7.9 / 115
8.3 / 120
12 / 174
19