Warnings, Prohibitions And Instructions; Introduction - probst AKZ-UNIGRIP-1230 Manual De Uso Y Mantenimiento

GB HYDRAULIC ROTATORS

2.4 Warnings, prohibitions and instructions

Before using the equipment, verify the presence of the
adhesive labels according to the diagram below.
SYMBOL MEANING
Prohibited to
clean, lubricate,
adjust or repair
with machine
running
Danger of
crushing
It is prohibited for the user to remove the
adhesive labels.

2.5 Introduction

FERRARI INTERNATIONAL S.p.A. would like to
thank you for the confidence you have shown in us by
choosing one of our products.
Continuous improvement and the search for the
most qualified products are the basis of our work. We
therefore reserve the right to make any modifications to
our equipment that we consider opportune, also without
prior notice, and without such modifications being
applied to machines sold beforehand.
In the event that the equipment is to be used in
particular conditions or for types of use different from
those which we have stated, we recommend that you
consult with our technical department.
The illustrations contained in this manual
refer to the standard model. The models
purchased may differ in certain particulars,
mainly due to the need for adaptation on
specific machinery and/or other equipment.
20
2.6 Norme di sicurezza
POSITION
On the
machine
On the
machine
It is strictly prohibited to use the equipment before having
blocked access to the work area by persons and animals;
for this purpose it is necessary to enclose the work area
and to adopt any appropriate measures to make all the
work operations safe.
All the safety rules prescribed for the machine are also
valid for the equipment; if there is any discrepancy
between the safety rules of the machine and those of the
equipment, the most restrictive rules must be applied.
The equipment is suitable for lifting and moving materials;
therefore, it is strictly prohibited to move the load above
persons or work stations.
Compliance of the equipment with the machine directive
is valid only if the machine on which it is installed also
complies with this directive.
Any servicing on the equipment must be carried out with
the machine stopped in a stable position.
The safety of the equipment is tied to the efficiency of the
safety systems of the machine on which it is installed.
The machine must be equipped with visual and
acoustic signalling devices to warn people when the
machine and the equipment are going into operation.
The equipment may only be used by personnel
It is strictly prohibited to pass
within the range of action of the
machine and the equipment.
Danger of suspended loads
Danger of crushing
Danger of entanglement